Edit Files

How to switch from the model space to the layout space

AutoCAD 360 does not automatically switch between paper and model space within the layout. You can only toggle between the model and layout using the Model-Layout tab

How can I get the coordinates of a specific point in the drawing ?

Quick tip: Long tap until the magnifying glass shows. The coordinates will appear at the top left corner of the screen in accordance to the finger's position (Pro feature). Use coordinates to identify specific points in the drawing. In order to get the coordinates information, you must use the magn...

How to measure the distance and angle between two points ?

Press the Distance button, and tap the canvas or double tap line. Tap to specify the first point and then drag or tap again to specify the end point. The fields in the measuring toolbar will be updated with the measurement data. After setting the end point, you can continue measuring additional di...

How to measure the distance and angle of a line or polyline segment ?

Press the Distance button and double tap to select a line or a polyline segment. The fields in the measuring toolbar will be updated with the measurement data. In case another line or polyline segment is selected using double tap, the data in the measuring toolbar will be updated.

How to measure the perimeter and area enclosed within selected points ...

Press the Area button, and tap canvas or double tap a polyline or circle. Tap to specify the first point and then drag or tap again to specify the next point. After setting the second point, you can continue to drag or tap to select the third point and additional measurement points. When additional ...

How to measure the area and perimeter of a polyline or circle ?

Press the Area button, and double tap to select a polyline or circle. The fields in the measuring toolbar will be updated with the measurement data.

How to measure the radius and perimeter of a circle or arc

Press the Radius button, and tap to select circle or arc. After specifying a circle or an arc, the fields in the measuring toolbar will be updated with the measurement data.

How to measure the angle between 3 points ?

Press the Angle button, and tap to specify the angle’s points. Specify the start point and drag or tap to specify the center point and the end point. After setting the end point, the measured angle will be updated on the appropriate field in the measuring toolbar.

How to set a layer as the Current Layer

Setting a layer as the current layer, defines it as the layer on which all drawing will take place from now on. All new objects drawn on this layer will be drawn in the color of the layer by default. To set a layer as the current layer the user can either long-tap the layer name (on tablets and phon...

How to use the Mirror tool ?

Quick Tip: click on an editable object and tap the Mirror button from the Edit Object Toolbar. The Mirror command creates a reversed/ mirrored image of the selected object in a specified direction and distance. It is located in the Edit Object toolbar which is accessible when tapping on any editabl...
3d530c91dc73ff643b57f4b670e27133@autocadws.desk-mail.com
http://assets3.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en_us/portal/articles/autocomplete